你的位置:首页 > 新闻动态 > 公司新闻

老化回馈电子负载并网逆变器节能开关电源选用说明

2013-06-10 20:47:33      点击:
发布时间:2016-3-11
回馈电子负载,
老化节能开关电源,
并网逆变器,
选用说明/Guidance and Applications:
一、输出功率/Output power:1500W,2000W……
二、输出电压/Output voltage:AC 230V(AC 176 ~ 264V)……
三、输入电压/Input voltage:DC 12V,24V,48V,72V……(电压适用范围/Voltage range: 10%)
四、输入功率可调:比如,输入12V 1500W的机型,输入功率可在10W~1500W之间随意调整。/
    Input Power can be adjusted, for example, Input Voltage 12V, Input Power 1500W, the input power can be adjusted from 10W to 1500W.
五、使用说明:1、使用输入12V机型老化输出5V电源时,把2台5V电源的输出串联;使用输入48V机型老化输出12V电源时,把4台12V电源的输出串联;2、根据需要老化的电源串并后的总功率,调节并网逆变器的输入功率等于或略小于老化总功率;3、调节并网逆变器的输入功率的方法有二:可调电阻和CAN总线;/
Applications: 1. When use 12V 1500W module to age 5Vo power supply, connect output terminals in the series of 2 pcs 5Vo power supply;
When use 48V 1500W module to age 12Vo power supply, connect output terminals in the series of 4 pcs 12Vo power supply;
2. According to total power of all series of power supply, to adjust input power of the inverter;
3. Method of adjusting Pin of inverter: adjustable resistor and CAN bus.
六、其他/others